Heat Exchangers and Inline heaters
TruFlow Components Distributes Wooam Super Polymer Products
Wooam Super Polymer is one of the leading Korean fluid handling component manufacturers, serving global semiconductor and display industries.
We provide products and services that meet or exceed customers’ needs and requirements.
Shell and Tube Heat Exchanger
- PTFE Tube Bundles of 30 to 1,200 Tubes
- Tube Diameters Ranging from 1/8″ to 3/8″
- Shell Diameters Ranging from 3″ to14″
- Shell Material : Available with Carbon Steel, PTFE Lined CT and SS Shell
- Industry: Semiconductor Industry, Fine chemical Industry
Modular Heat Exchanger
- Module Design according to customers specification
- Max Tube Diameter : 19mm
- Various Connection Option
- Efficient Baffle Design Minimizing Sludge Deposits
- Industry: Steelmaking Industry, Smelting Industry
WHX WASTE ACID DISPOSAL COOLER
- Significantly Cut Acid Disposal Cost by Reducing Water Aspiration.
- Unnecessary of Additional Buffering Tank and Heat Exchanger for Cooling.
- Produces 50~70℃ Piping &Tank Safe Waste Chemical with Gravity.
- Batch Process Cooling of Process Chemical
- Shell Material: PTFE (Excellent Corrosion Resistance & Thermal Expansion Resistance)
- Flange equipped with PCW In/Out Fitting In One Body
- Heat Transfer Area: 5.5m2
- Configuration: Horizontal
- Dimension: Ø170*1000mm(L)
- Gravity Feed Rate:50L/2.5Min
- Volume: 20 Liter
- Connection: 1” for Chemical, 1” for PCW
HOT SULFURIC ACID (150 °C) DISPOSAL COLLER
- Hot Sulfuric Acid (150 ℃) Disposal Cooler for PR Strip
- Material: PTFE
- Dimension: 330mm X 530mm X 573mm(H)
- Volume: 50L/20min. Bath
- PCW Flow Rate: 30LPM
- Sulfuric Acid In/Out Temp. : 150/43 ℃
The DURAHEAT In-Line Heater provides high purity and reliability heating of chemicals for semiconductor. Special fusion welding of heater housing eliminates O-Rings and moving parts for only PTFE / PFA contact for wetted surfaces.
DURAHEAT IM In-Line Heater
- One-Body PTFE Heater Housing
- PFA-jacketed heating element
- Power: 6.3 KW, 208V, 10, 60Hz, 30.3 AMPS
- Ground Wire : Pt / Ir
- Process Inlet / Outlet Fitting : 1″ Pillar Super 300
- Air Vent: 1/4″ Flare
- Drain : 1/2″ Pillar Super 300
- Housing Dimension : 233 x 153 x 523mm(H)
- Maximum Operating Pressure : 5.0Kg / C㎡ G @ 120°C
- Process Temperature Sensor : PT 100Ω
- Hi-Limit Sensor : PT 100Ω
- Thermal Fuse: Set Point 167°C
DURAHEAT Heat-Cool Unit
- One-Body PTFE Heater Housing
- PVDF Shell
- PFA-jacketed heating element
- Power: 2.2KW, 6.3 KW, 208V, 10, 60H
- Cooling Coil: 0.5㎡ (Cooling Capacity : 5,700Kcal/Hr w/18 C Chilling Water)
- Ground Wire: Pt/ Ir
- Process Inlet / Outlet Fitting : 3/4″ Pillar Super 300
- Housing Dimension : 0225 x 519mm(H)
- Maximum Operating Pressure : 5.0Kg/Cm G @ 120°C
- Process Temperature Sensor : PT 100Ω
- Hi-Limit Sensor : PT 100Ω
- Thermal Fuse : Set Point 167°C
The DURAHEAT Heat-Cool Unit provides high purity and reliability heating / Cooling of chemicals for semiconductor. Special fusion welding of heater housing eliminates O-Rings and moving parts for only PTFE/PFA contact for wetted surfaces.
For more information on our full line of heat exchangers, inline heaters and more, please contact a sales representative.